Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Power unit | 4-cylinder diesel engine (2.0 l engine, 4 valve) | Fuel supply, gas operation | Parts of fuel supply system (Golf, Golf Plus)

Removing and installing fuel cooler

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1331/-

Removing

–	Note safety precautions before beginning work → Chapter.

Observe rules for cleanliness → Chapter.

Note

The fuel cooler is located in the return line to tank. It is located on the vehicle underbody.

–	Remove underbody panel.

–	Separate fuel lines at fuel cooler.

–	Remove securing nuts -arrows-.

Installing

Install in reverse order. In the process, note the following:

t	Tighten fuel cooler securing nuts to 15 Nm.

Volkswagen Workshop Service and Repair Manuals