Golf Mk5
| Assembly overview - intake manifold (engine code BCA) |
| 1 - | Oil dipstick |
| 2 - | 20 Nm |
| 3 - | Fuel rail with injectors |
| q | Dismantling and assembling → Chapter. |
| 4 - | Throttle valve module -J338- |
| q | Clean → Chapter. |
| q | If renewed, adapt engine control unit to throttle valve module → Vehicle diagnostic tester„Guided functions“. |
| 5 - | 7 Nm |
| 6 - | Seal |
| q | Renew if damaged. |
| 7 - | Connecting hose |
| q | For crankcase ventilation. |
| q | Check for secure seating. |
| 8 - | 7 Nm |
| 9 - | Connecting pipe |
| q | For exhaust gas recirculation. |
Note| For vehicles model year 2006 ► no exhaust gas recirculation system is installed. |
| 10 - | Seal |
| q | Renew. |
| 11 - | Intake manifold |
| 12 - | Seal |
| q | Renew. |
| 13 - | O-ring |
| q | Renew if damaged. |
| 14 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42-. |
