Golf Mk5
Assembly overview - parts of cooling system, body side, radiator with one fan (Golf, Golf Plus) |
1 - | Upper coolant hose |
q | Secured to radiator with retaining clip. |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
2 - | O-ring |
q | Renew. |
3 - | Radiator |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant. |
4 - | Gasket |
5 - | Cap |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | Pressure relief valve must open at between 1.4 … 1.6 bar. |
6 - | Connector |
7 - | 5 Nm |
8 - | Expansion tank |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
9 - | Bracket |
q | For radiator |
10 - | 5 Nm |
11 - | Mounting |
12 - | Radiator fan |
13 - | Cowling |
14 - | 10 Nm |
15 - | 4.8 Nm |
16 - | Connector |
17 - | Lower coolant hose |
q | Secured to radiator with retaining clip. |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
18 - | Retaining clip |
19 - | Radiator fan thermal switch -F18- 35 Nm |
Switching temperatures: |
q | 1st level on: 92…97 °C, off: 84…91 °C |
q | 2nd level on: 99…105 °C, off: 91…98 °C |
20 - | O-ring |
q | Renew. |