Golf Mk5
|
1 - | Connection |
2 - | O-ring |
q | Renew. |
3 - | Spring |
4 - | Coolant temperature sender -G62- |
q | Before removing, release pressure in cooling system if necessary. |
5 - | Plunger |
6 - | Retaining clip |
q | Check for secure seating. |
7 - | 10 Nm |
8 - | Thermostat housing |
9 - | Seal |
q | Renew. |
10 - | To heat exchanger |
q | Coolant hose schematic diagram → Chapter. |
11 - | From heat exchanger |
q | Coolant hose schematic diagram → Chapter. |
12 - | Coolant pump housing on cylinder block |
13 - | Connection |
14 - | To expansion tank. |
q | Coolant hose schematic diagram → Chapter. |
15 - | Coolant pipe |
q | Coolant hose schematic diagram → Chapter. |
16 - | Thermostat |
Control range: |
q | Long thermal element 87…102 °C |
q | Short thermal element 103…120 °C |
17 - | 5 Nm |
18 - | From bottom of radiator. |
q | Coolant hose schematic diagram → Chapter. |
19 - | To top of radiator |
q | Coolant hose schematic diagram → Chapter. |
|
1 - | Coolant pump |
q | Removing and installing → Chapter. |
q | Check for ease of movement. |
q | With integrated seal. |
q | If damaged or leaking, renew complete. |
2 - | 9 Nm |
3 - | 20 Nm |
4 - | Belt pulley |
q | Use water pump wrench -V.A.G 1590- to loosen and tighten. |
q | Modifying water pump wrench -V.A.G 1590- → Fig. |
q | When installing note fixing arrangement. |
q | Removing and installing poly V-belt → Chapter. |