Golf Mk5
Assembly overview - parts of cooling system, engine side |
Thermostat side |
1 - | Connection |
2 - | O-ring |
q | Renew. |
3 - | Spring |
4 - | Plunger |
q | Do not cant when installing. |
5 - | Thermostat |
Note
Do not interchange thermo elements. |
Starts to open |
q | Thermo element (bottom of illustration): 83°C. |
q | Thermo element (top of illustration): 105°C. |
6 - | Coolant temperature sender -G62- |
q | Before removing, release pressure in cooling system if necessary. |
7 - | Retaining clip |
q | Check for secure seating. |
8 - | Thermostat housing |
9 - | Seal |
q | Renew. |
10 - | 11 Nm |
11 - | To expansion tank. |
q | Coolant hose schematic diagram → Chapter. |
12 - | Connection |
13 - | Coolant pipe |
q | Coolant hose schematic diagram → Chapter. |
14 - | Coolant pipe |
q | Coolant hose schematic diagram → Chapter. |
15 - | 5 Nm |
16 - | From bottom of radiator. |
q | Coolant hose schematic diagram → Chapter. |
17 - | To top of radiator |
q | Coolant hose schematic diagram → Chapter. |