Note t
| When installing an exchange cylinder head, all the contact surfaces between the support elements, roller rocker arms and the cams must be oiled before installing the camshaft housing. |
t
| The plastic protectors fitted to protect the open valves must be removed only immediately before the cylinder head is fitted. |
t
| If the cylinder head is replaced, all the coolant in the system must also be renewed. |
t
| All bearing and running surfaces must be oiled before assembly. |
t
| Removing and installing intake manifold → Chapter. |
Removing and installing timing chain and drive chain for oil pump → Chapter |
Removing and installing camshaft housing → Chapter. |
Removing and installing cylinder head → Chapter. |
|
|
|