Removing and installing parts of exhaust system |
Note t
| After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. If necessary, loosen double clamp and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded. |
t
| Renew self-locking nuts. |
Assembly overview - catalytic converter and add-on parts → Chapter |
Assembly overview - silencer with mountings (Golf, Golf Plus, Scirocco) → Chapter |
Assembly overview - silencer with mountings (Passat 2006 ►) → Chapter |
Assembly overview - silencer with mountings (Passat 2011 ►) → Chapter |
Assembly overview - silencer with mountings (Eos) → Chapter |
Assembly overview - silencer with mountings (Tiguan) → Chapter. |
Removing and installing centre and rear silencers (Golf, Golf Plus, Scirocco, Eos) → Chapter. |
Detaching centre and rear silencers (Passat) → Chapter. |
Separating centre and rear silencers (Tiguan) → Chapter. |
Mounting position and specified torque of the clamping sleeve → Chapter |
|
|
|