Golf Mk5
| Assembly overview - exhaust gas recirculation system |
| 1 - | Gasket |
| q | Renew. |
| 2 - | 10 Nm |
| 3 - | Connecting pipe |
| 4 - | Exhaust manifold |
| 5 - | 4 Nm |
| 6 - | Retaining clip |
| q | For wire to Lambda probe before catalytic converter. |
| 7 - | 80 Nm |
| 8 - | Lambda probe -G39-, 50 Nm |
| q | When replacing, erase learnt values in engine control unit → vehicle diagnosis tester “Guided fault finding”.. |
| 9 - | 6-pin connector |
| 10 - | 60 Nm |
| 11 - | Throttle valve module -J338- |
| q | If renewed, adapt engine control unit to throttle valve module → vehicle diagnosis tester, “Guided function”. |
| 12 - | 25 Nm |
| 13 - | Exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212- |
| q | If renewed, adapt engine control unit to exhaust gas recirculation valve → vehicle diagnosis tester, “Guided function”. |
| 14 - | 6-pin connector |
| 15 - | From air filter |
| 16 - | Breather hose |
| 17 - | Connection with combination valve |
| q | Bracket for exhaust gas recirculation valve -N18- |
