| Removing and installing suction-jet pump |
Note | t
| On vehicles with four-wheel drive, fuel has to be pumped from the area of fuel gauge sender 2 -G169- to the fuel delivery unit by means of a suction-jet pump due to the shape of the fuel tank. |
| t
| A check is only necessary if the engine stops due to lack of fuel, even though the fuel gauge shows the tank to be 1/4 full. |
| –
| Remove fuel gauge sender 2 -G169- → Chapter. |
| –
| Now the suction-jet pump can be pulled out from the side of the fuel gauge sender 2 -G169- (left side of vehicle). |
| –
| Check that the fuel lines on suction-jet pump are fitted securely and are not damaged. |
| –
| Additionally check suction-jet pump for possible soiling. |
|
|
|
