volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Emptying fuel tank if it is more than 3/4 full > < Emptying fuel tank
Emptying fuel tank with fuel pump in good working order
Emptying fuel tank with fuel pump in good working order
Special tools and workshop equipment required
t  Adapter for fuel extraction -VAS 5190 /3-
t  Test instrument adapter/DSO (5-pin) -VAS 5565-
t  Remote control -V.A.G 1348/3A-
  WARNING
t  The fuel supply line is pressurized! Wear eye protection and protective clothing to avoid possible injury and skin contact. Before loosening hose connections, wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
t  Connect fuel extractor -VAS 5190- earth wire to vehicle earth.
   
–  Pull off supply line -arrow- and catch escaping fuel with a cloth.
  Note
Press in securing ring to release fuel lines.
  A20-10135
–  Connect fuel extractor -VAS 5190- with adapter for fuel extraction -VAS 5190 /3- to fuel supply line.
–  Remove seat bench → General body repairs, interior; Rep. Gr.72.
  N20-10482
–  Remove cover -1- with fuel pump control unit -J538--2- from fuel delivery unit.
  N20-0603
–  Pull 5-pin connector off fuel delivery unit flange.
  A20-1067
–  Connect test instrument adapter/DSO (5-pin) -VAS 5565- to connector and fuel delivery unit.
–  Connect remote control -V.A.G 1348/3A- to test instrument adapter/DSO (5-pin) -VAS 5565- and to battery positive (+).
  Note
This step serves only to have the fuel pump running when the engine is stopped.
–  Remove filler cap from fuel tank filler neck.
–  Operate remote control -V.A.G 1348/3A- and shut-off tap on fuel extractor -VAS 5190- until fuel tank is empty.
  N20-10422

Emptying fuel tank if it is more than 3/4 full > < Emptying fuel tank