Golf Mk5
| Assembly overview - aluminium fuel rail |
| 1 - | Fuel pressure sender for low pressure -G410- |
| q | 15 Nm |
| 2 - | Fuel pipe |
| q | Install free of tension. |
| 3 - | 15 Nm |
| q | Renew. |
| q | With conical sealing seat |
| q | Ensure cleanliness. |
| 4 - | Hexagon socket head bolt 10 Nm |
| 5 - | Clamp |
| 6 - | Connecting piece |
| 7 - | 25 Nm |
| q | Renew. |
| q | With conical sealing seat |
| q | Ensure cleanliness. |
| 8 - | Fuel pipe |
| q | Observe the safety precautions when releasing pressure in the high-pressure section → Chapter. |
| q | Install free of tension. |
| 9 - | Fuel pressure sender -G247- |
| q | 22 Nm |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| 10 - | 10 Nm |
| 11 - | Cable retainer |
| 12 - | Connector |
| q | For injectors. |
| 13 - | Bracket |
| 14 - | Union nut for pressure limiting valve 30 Nm |
| 15 - | Pressure limiting valve |
| 16 - | 10 Nm |
| 17 - | Fuel rail with intake manifold flap motor -V157- and intake manifold flap potentiometer -G336- |
| q | If renewed, adapt to engine control unit → Vehicle diagnosis, testing and information system VAS 5051“Guided functions”. |
| 18 - | Gasket |
| q | Renew |
| 19 - | Injector, cylinder 1 -N30- through injector, cylinder 4 -N33- |
| q | Removing and installing → Chapter |
| 20 - | Partition |
