volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

USB connection for USB sticks and MP3 player > < Fault finding procedure
Required special tools, workshop equipment, testers, measuring instruments and auxiliary items
   
Required special tools, workshop equipment, testers, measuring instruments and auxiliary items
t  Vehicle diagnostic, testing and information system -VAS 5051- or vehicle diagnostic and service information system -VAS 5052-
t  Diagnostic cable -VAS 5051/5a- or -VAS 5051/6a- or -VAS 5052/3-
t  Select the “Test equipment” in vehicle diagnostic, testing and information system -VAS 5051- or vehicle diagnostic and service information system -VAS 5052-.
Fault finding procedure:
The “iPod player” holder is not capable of self-diagnosis.
If signal transmission to the radio or radio navigation system does not function, voltage supply at connector can be checked.
Test prerequisites:
t  First make sure that the “iPod player” itself is not the source of the fault → Owner's Manual.
t  First “RESET” the “iPod player” → Owner's Manual.
t  Check that the fuse is OK.
t  Check radio or radio navigation system for faults via self-diagnosis.
Proceed as follows:
–  Remove the “iPod player” holder → Chapter.
–  Disconnect holder connector beneath storage compartment.
–  Use vehicle diagnostic, testing and information system -VAS 5051- or vehicle diagnostic and service information system -VAS 5052- to check the following voltages at the wiring harness-side connector.
t  At connector T12, 12-pin, at terminal 6 voltage supply, positive, with radio unit switched on
t  At connector T12, 12-pin, at terminal 8 voltage supply, positive, control cable, with radio unit switched on
t  At connector T12, 12-pin, at terminal 3 voltage supply, terminal 31, negative
If the specified voltage values cannot be measured, repair the cable connections referring to current flow diagram.
If no fault can be found, renew “iPod player” holder.
  W00-10343

USB connection for USB sticks and MP3 player > < Fault finding procedure