| Deactivating anti-theft coding |
| A locked radio navigation system can only be returned to normal operation by entering the correct code number for the anti-theft coding. |
Note | t
| The code number for the anti-theft coding is stuck to the radio card, together with the unit number → Operating Manual. |
| t
| The radio card should not be kept in the vehicle for security reasons. If necessary, ask the customer for the code number. |
| t
| If a radio navigation system is renewed, the code number of the renewal unit also must be used. |
| t
| The customer must be informed that the code number has changed. |
| –
| Obtain the unit's code number. |
| –
| Switch radio navigation system on. |
| The word “SAFE” and the number sequence “0000” appear in the display. |
| –
| Enter the code number that has been adhered to the radio card by marking the numbers from the letters and numbers selection box one after another and confirming using the right rotary push button. |
Note | Entering the 1st number overwrites the row of figures “0000”. |
| –
| Once you have entered the anti-theft code, press the button located next to the word “OK” in the display. |
| The unit will be released and is ready for use. |
Note | If the incorrect anti-theft code is entered, it can be immediately corrected in two further attempts. If the wrong anti-theft code is entered three times, the radio navigation system is locked for one hour. Leave ignition and radio navigation unit switched on. The process of deactivating the anti-theft coding can then be repeated after one hour. Remember: you always have three attempts at entering the code, then the radio navigation system is blocked for one hour. |
|
|
|
