volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Central locking and anti-theft alarm system aerialR47 > < Removing and installing interior monitoring sensor

Golf Mk5

Removing and installing vehicle inclination senderG384
Removing and installing vehicle inclination sender -G384-
   
The vehicle inclination sender -G384--arrow- is located on the right beneath the dash panel, behind the front passenger's airbag.
  Note
Deactivate the anti-theft alarm → Chapter before removing the sender.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove glove compartment → General body repairs, interior; Rep. gr.68.
  N97-0550
–  Unscrew securing bolts -1- and remove vehicle inclination sensor -G384- from bracket.
–  Release connector -2- and disconnect it from vehicle inclination sender -G384-.
Installing:
Installation is carried out in reverse order of removal.
  N96-10239

Central locking and anti-theft alarm system aerialR47 > < Removing and installing interior monitoring sensor