–
| Remove securing nut -1-. |
–
| Unscrew securing bolt -2- and remove front left vehicle level sender -G78--3-. |
Install in the reverse order of removal. When doing this, note the following: |
–
| Tighten threaded connections to specified torques → Chapter. |
–
| Check front left vehicle level sender -G78- → Chapter. |
Note t
| If the vehicle level senders are renewed, the sender values must be checked → Chapter and a headlight basic setting must be carried out → Booklet38. |
t
| If the values from the vehicle level senders are outside the specified tolerance, basic headlight setting cannot be carried out. |
|
|
|