Removal and installation sequence of components of steering column switch |
For removal of the complete steering column switch, inc. base, the switch is dismantled and the steering lock housing is also removed. For assembly of the steering lock housing, new shear bolts are required. |
Even if just one component of the steering column switch is removed or renewed, the sequence described as follows must be adhered to. |
Caution When batteries are disconnected and reconnected, the procedure described in the workshop manual must be strictly observed → Chapter. |
|
Remove components of steering column switch in the following sequence: |
t
| Steering column electronics control unit -J527- → Chapter |
t
| Airbag coil connector and return ring with slip ring -F138- → Chapter |
Installation is carried out in the reverse sequence. |
|
|
|