Golf Mk5
| Assembly overview |
| 1 - | Hexagon head flange bolt |
| q | M10 x 22 |
| q | 60 Nm |
| 2 - | Washer |
| 3 - | Tensioning roller |
| 4 - | Hexagon head flange bolts |
| q | M8 x 90 |
| q | 20 Nm |
| 5 - | Hexagon head flange bolts |
| q | With air conditioning system M10 x 55, aluminium cylinder block |
| q | With air conditioning system M10 x 50, cast iron cylinder block |
| q | 40 Nm |
| 6 - | Ancillary bracket |
| q | For alternator and air conditioner compressor |
| 7 - | Hexagon head flange bolt |
| q | M8 x 45 |
| q | 20 Nm |
| 8 - | Hexagon head flange bolts |
| q | With air conditioning system M10 x 45, aluminium cylinder block |
| q | With air conditioning system M10 x 40, cast iron cylinder block |
| q | 40 Nm |
| 9 - | Protective cap for alternator |
| 10 - | Hexagon bolts with washer |
| q | M4 x 20 |
| q | 2 Nm |
| 11 - | Protective cap for carbon brushes |
| 12 - | Voltage regulator |
| q | Removing and installing voltage regulator → Chapter |
| 13 - | Alternator |
| q | Removing and installing alternator → Chapter |
| q | Checking alternator → Chapter |
| q | Securing B+ wire to alternator → Chapter |
| q | Removing and installing poly V-belt pulley on alternator → Chapter |
| 14 - | Poly V-belt |
| q | Poly V-belt routing → Chapter |
| q | Checking poly V-belt → Chapter |
| 15 - | Hexagon bolt with washer and threaded element |
| q | M4 x 20, M4 x 15 |
| q | 2 Nm |
| 16 - | Poly V-belt tensioning element |
|
