Tightening sequence of ancillary bracket to cylinder head, vehicles with air conditioning system |
–
| Place ancillary bracket on cylinder block. |
Note Before tightening to specified torque, screw in all bolts by hand. |
–
| Tighten securing bolts of ancillary bracket in following sequence: |
A - | M10 x 45 hexagon head collared bolt, 52 Nm (fitted hole) |
B - | M10 x 45 hexagon head collared bolt, 52 Nm |
C - | M10 x 45 hexagon head collared bolt, 52 Nm |
D - | M10 x 45 hexagon head collared bolt, 52 Nm |
E - | M10 x 45 hexagon head collared bolt, 52 Nm |
F - | M10 x 45 hexagon head collared bolt, 52 Nm |
|
|
|