Performing maintenance test |
WARNING It is not permissible to test or charge batteries whose colour indicator is light yellow. Do not slave/jump start the vehicle! |
Danger of explosion when checking and charging or slave/jump starting. |
These batteries must be renewed. |
|
–
| Select „Maintenance test“ in the menu. |
Note If no scanner is available, write vehicle identification number on test printout by hand. |
–
| Scan in vehicle identification number. |
–
| Select „On battery terminal“ or „On jump-start point“. |
–
| Scan in 2D code of battery or select type and make manually in menu. |
–
| Measure temperature. Hold temperature sensor about 5 cm above terminal connection until temperature stabilises. |
–
| Print out test log if necessary. |
|
|
|