Golf Mk6
| Removing and installing reinforcing member »R« |
| Remove reinforcing member |
| – | Remove lift cylinder for headlight washer system → Vehicle electrics; Rep. gr.92 |
| – | Unscrew bolts -2-. |
| – | Detach fasteners -arrows- of the reinforcing member -3- from the bumper cover -1-. |
| Install reinforcing member |
| – | Press reinforcing member -3- into detents -arrows- of bumper cover -1-. |
| – | Tighten bolts, specified torque: 2 Nm |
