t
| Before removal, warm the lettering with a hot air blower -V.A.G 1416-. |
t
| If lettering is removed and reinstalled, only use adhesive remover -D 002 000 10- to remove the adhesive remains. |
t
| Ensure that the adhesive surfaces are free of dust and grease. |
t
| The lettering must be bonded in place immediately after cleaning. |
t
| Pull protective backing off only directly prior to installation. |
t
| Working temperature is approx. 21 ℃. |
t
| Lettering cannot be removed without damage. |
|
|
|