volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing window crank > < Removing

Golf Mk6

Installing
Installing
  WARNING
If a new window regulator motor is installed (door control unit), the additional functions and the excess force limitation feature have to be coded!
   
–  Position window regulator motor -1- and gently pull door window up and down to facilitate motor and cable drum toothing intermesh.
–  Secure connectors -3-.
Specified torque for bolts -2- 3.5 Nm.
–  A new window regulator motor is coded using vehicle diagnosis and service information system -VAS 5052 A-.
–  After coding, allow the window regulator to run upwards once onto stop in automatic mode and pull switch again for 2 seconds. This programs the upper stop for the window regulator motor.
–  Then perform remaining installation in reverse order of removal.

   

Removing and installing window crank > < Removing