Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Body | General body repairs, exterior | Sliding roof | Sliding/tilting sunroof with glass panel (Meritor)

Adjusting parallel running

Note

The parallel running adjustment can only be made when the drive and glass panel are removed ("0" position).

–	Remove sunroof glass panel drive → Chapter

The mark -arrow- on the rear of the guide upper section -1- must, on both sides, lie within the marks dimension -a- on the guide plate -2-.

The guide plate -2- must be located in the guide rails (cannot be moved by hand).

–	Push guide upper part -1- both sides centrally between the marks.

–	Install drive in this (zero) position.

l	Then check zero position.

Volkswagen Workshop Service and Repair Manuals