volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting height of sliding/tilting sunroof glass panel > < Installing sliding/tilting sunroof glass panel

Golf Mk6

Zero position:
Zero position:
   
The mark -arrow- on the rear of the guide upper section -1- must, on both sides, lie within the marks dimension -a- on the guide plate -2-.
The guide plate -2- must be located in the guide rails (cannot be moved by hand).
If this is not the case, adjust parallel running → Chapter
  N60-0109
–  Insert sliding/tilting sunroof glass panel -2- from above and fit bolts -1-.
–  Lightly tighten bolts -1-.
–  Adjusting sunroof glass panel (height adjustment): → Chapter
  Note
t  After adjusting panel height, tighten securing screws (4.5 Nm).
t  Install boot after adjusting height of panel
  N60-10027

Adjusting height of sliding/tilting sunroof glass panel > < Installing sliding/tilting sunroof glass panel