| Checking operation of belt buckle |
| –
| Push latch plate into belt buckle until it engages audibly. Check whether locking mechanism is properly engaged by pulling firmly on belt webbing. |
| l
| If latch plate fails even once to engage properly in belt buckle during at least 5 tests, renew seat belt complete with belt buckle. |
| Checking release mechanism: |
| –
| Release seat belt by pressing button on belt buckle with finger pressure. |
| –
| When belt is slack, latch plate must spring out of belt buckle on its own. |
| l
| Carry out test at least 5 times. If latch plate fails even once to spring out of buckle, renew seat belt complete with belt buckle. |
WARNING | Under no circumstances whatsoever may lubricant be used to eliminate noise or stiffness in belt buckle buttons. |
|
|
|
|
