volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing front seat belt buckle (4-door)

Golf Mk6

Removing
Removing
–  Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-.
–  Remove front seat → Chapter.
–  Secure seat to seat repair stand -VAS 6136-.
–  Move seat to foremost position.
   
–  Disconnect wiring harness from seat frame, if part of original equipment.
–  Unscrew bolt -1- (20 Nm).
  Note
t  The bolt is microencapsulated and must be renewed each time it is loosened.
t  Before a new bolt is installed, the thread of the corresponding nut must be cleaned.
–  Pull belt buckle -2- out of mounting in seat rail -arrow-.

   

Installing > < Removing and installing front seat belt buckle (4-door)