Golf Mk6
|
– | Actuate respective button in head restraint guide and pull out head restraint -1- from backrest. |
Only 2-door |
– | Pull off operating knob -2-. |
– | Insert a screwdriver -direction of arrow- and lever trim -3- out of mounting. |
Note
When installing, remove retaining spring -4- from lever -5- and renew it. |
Only vehicles (Golf 2004 ►) with manual height adjustment of lumbar support |
– | Using removal pliers -3392-, remove knob -6- for lumbar support height adjustment. |
All vehicles |
– | Unhook profiled piece -7- on both sides of backrest. |
– | Release profile -8- from mounting -9-. |
– | Remove side retaining bars -1- and -2- from mountings and fold back of cover upwards. |
– | Remove plate -3- from backrest. |
– | Open side retaining bar -4- and unhook tensioning wire -5-. |
– | Open side retaining bar -7- and unhook tensioning wire -6-. |
– | Fold cover -5- upwards. |
– | Using a small screwdriver, unclip cover profiles -1- from mountings -2- in padding. |
– | Unhook tensioning wire -4- from padding wire -3- on both sides. |
– | Remove head restraint guides → Chapter. |
– | Remove cover -5- and padding -6- from backrest frame -7-. |