volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Vacuum pump for brakesV192 > < Removing and installing vacuum senderG608

Golf Mk6

Removing and installing brake servo pressure sensorG294
Removing and installing brake servo pressure sensor -G294-
Applies only to vehicles with a petrol engine and a dual clutch gearbox without HBV (hydraulic brake with vacuum servo).
–  Remove engine cover panel.
–  Pull vacuum hose together with brake servo pressure sensor -G294- out of brake servo.
   
–  Release clips with pliers -1-.
–  Carefully lever off brake servo pressure sensor -G294--2-.
  A47-10021

Vacuum pump for brakesV192 > < Removing and installing vacuum senderG608