volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing brake servo pressure sensorG294 > < Checking non-return valve

Golf Mk6

Removing and installing vacuum senderG608
Removing and installing vacuum sender -G608-
Only on vehicles having HBV (hydraulic brake with vacuum servo).
–  Remove engine cover panel.
–  Pull vacuum hose together with vacuum sender -G608- out of brake servo.
   
–  Release clips with pliers -1-.
–  Carefully lever vacuum sender -G608--2- out.
  A47-10021

Removing and installing brake servo pressure sensorG294 > < Checking non-return valve