volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - front brake caliper FN 3 > < Removing

Golf Mk6

Installing
Installing
–  The surfaces of the piston and seal must be cleaned only with methylated spirits and then dried.
–  Apply a thin coat of assembly paste G 052 150 A2 to piston and seal before inserting.
–  Insert seal into brake caliper.
   
–  Place outer sealing lip of protective cap on the piston.
–  Insert inner sealing lip into groove in cylinder using wedge 3409.
  N47-0079
When doing this, hold piston in front of brake caliper.
  N47-0105
–  Press piston into brake caliper with piston resetting tool.
The outer sealing lip on the protective cap will then slip into the piston groove.
  N47-0112

Assembly overview - front brake caliper FN 3 > < Removing