volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing heat exchanger > < Removing and installing driver side footwell vents
Removing and installing front passenger side footwell vents
Removing and installing front passenger side footwell vents
Removing
–  Remove glove compartment → General body repairs, interior; Rep. gr.68.
   
–  Remove securing bolt -2- (1.5 ± 0.2 Nm) and remove footwell vent -1-.
Installing
Install in reverse order.
–  Tighten securing bolt -2- to 1.5 ± 0.2 Nm.
  Note
If the vehicle has glove compartment cooling, ensure that the cooling hose is properly seated.
  N80-10045

Removing and installing heat exchanger > < Removing and installing driver side footwell vents