Golf Mk6
Note
|
1 - | Cap with circlip |
q | Remove carefully using a small screwdriver or long nose pliers (be especially careful with the poly V-belt pulley) |
2 - | Drive plate |
3 - | Circlip |
q | Always renew |
q | Install correctly (flat side faces air conditioner compressor) |
4 - | Shim |
5 - | Poly V-belt pulley |
q | The poly V-belt pulley is made of plastic and sensitive to impact. Therefore, exercise particular caution when handling it. |
q | Various versions → Parts catalogue |
6 - | Air conditioner compressor |
q | Various types are installed, depending on type of engine and country version → Parts catalogue |
q | Clean air conditioner compressor flange before fitting poly V-belt pulley |
7 - | Rubber element |
q | Qty. 6 |
q | Decouples poly V-belt pulley from drive shaft of air compressor and absorbs vibrations and noise. |
q | Lightly moisten rubber elements with, for example, tyre assembly paste or soapy solution (used as a lubricant) when installing. |