volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Gearbox mechanics,operation, construction,diff. > < Assembly overview - clutch in connection with simple flywheel

Golf Mk6

Removing and installing clutch in connection with simple flywheel
   
Removing and installing clutch in connection with simple flywheel
Special tools and workshop equipment required
t  Counterhold -3067-
t  Centring mandrel -3190 A-
t  Torque wrench -V.A.G 1331-

   
Centring clutch plate and removing and installing pressure plate
–  Loosen or tighten bolts diagonally in stages.
–  Reverse position of counterhold -3067- when removing.
  Note
Pressure plate contact surface and clutch plate lining must make full contact with flywheel. Tighten bolts diagonally and evenly to prevent damage to the centring holes in the pressure plate housing and the centring pins in the flywheel.
  V30-0378
Checking ends of diaphragm spring
l  Wear up to half the thickness of the diaphragm spring is permitted.
  V30-0094
Checking spring connections and riveted connections
–  Check spring connections between pressure plate and cover for cracks as well as rivet connections for secure seating.
l  A pressure plate with damaged spring connections or with loose rivet connections -arrows- must be renewed.
  V30-0454

Gearbox mechanics,operation, construction,diff. > < Assembly overview - clutch in connection with simple flywheel