–
| Engage 5th gear. Loosen bolt -1-. Push locking collar and selector jaw in direction of arrow and then tighten bolt -1- to 25 Nm. |
l
| Check measurement: It must not be possible to slide a 0.2 mm feeler gauge between locking collar and gear wheel. If necessary, repeat adjustment. |
–
| Disengage 5th gear. Locking collar must now be in the neutral position. Synchro-ring must move freely. |
–
| Shift through all gears. |
–
| Fit release bearing guide sleeve → Chapter. |
–
| Fit clutch release lever and release bearing → Chapter. |
–
| Top up gear oil, Golf 2009 ► with turbo diesel engine → Anchor |
–
| Top up gear oil, Golf 2009 ► with petrol engine → Anchor. |
|
|
|