volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Bleeding clutch system > < Removing

Golf Mk6

Installing
Installing
Install in the reverse order of removal, observing the following:
   
–  Install slave cylinder and tighten bolts -arrows- to specified torque → Item.
–  Insert line between master and slave cylinders -B- into slave cylinder to stop.
–  Push securing clip -A- into line between master and slave cylinders to stop.
–  Test pipe/hose line by tugging on it.
–  Press line between master and slave cylinders into mounting -C- to stop on gearbox.
–  Bleed clutch system after installing slave cylinder → Chapter.
Assembling selector mechanism → Chapter.
Adjust selector mechanism → Chapter.
–  If removed, install complete air filter housing → Rep. gr.23 or → Rep. gr.24
–  Connect battery earth → Electrical system; Rep. gr.27.
  A30-0062

Bleeding clutch system > < Removing