t
| Loosen and tighten securing bolts and nuts for covers and housings diagonally. |
t
| Do not cant especially delicate parts, such as clutch pressure plates. Loosen and tighten bolts and nuts in stages in a diagonal sequence. |
t
| Torque settings are specified for unoiled bolts and nuts. |
t
| Always renew self-locking bolts and nuts. |
t
| Ensure with threaded connections that contact surfaces as well as nuts and bolts are rewaxed only after assembly, if necessary. |
t
| Use a thread chaser to clear residual locking fluid from all threaded holes into which self-locking bolts are to be screwed. Otherwise there is a danger of bolts shearing when subsequently being removed. |
t
| Check pitch of thread, to ensure correct thread chaser is used to clean threads and to ensure the threads are not damaged. |
|
|
|