t
| Loosen and tighten bolts and nuts for covers and housings diagonally. |
t
| Torque settings are specified for unoiled bolts and nuts. |
t
| Clean threads of bolts to which locking fluid was applied using a wire brush and apply AMV 185 100 A1 locking fluid before replacing. |
t
| Use a thread chaser to clear residual locking fluid from all threaded holes into which self-locking bolts are to be screwed. Otherwise there is a danger of bolts shearing when subsequently being removed. |
t
| Always renew self-locking bolts and nuts. |
|
|
|