volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing oil seal for right flange shaft, Golf and Touran from gearbox manufacture date 01 11 4, Golf Plus, Passat, Passat CC, C

Golf Mk6

Removing
Removing
–  Remove noise insulation → General body repairs, exterior; Rep. gr.50.
   
–  Remove drive shaft heat shield, if present -arrows- → Running gear, axles, steering; Rep. gr.40.
–  Remove right drive shaft from gearbox, raise and secure it → Running gear, axles, steering; Rep. gr.40.
  Note
t  With some engines, the drive shaft cannot be raised and secured high enough that the flange shaft can be pulled out.
t  Then remove drive shaft. → Running gear, axles, steering; Rep. gr.40
  N34-11369
–  Remove flange shaft securing bolt → Item by screwing 2 bolts into flange and counterholding flange shaft with a lever.
–  Place drip tray under gearbox.
–  Pull out flange shaft with compression spring.
–  Pry seal out using assembly lever.
  A39-0360

Installing > < Renewing oil seal for right flange shaft, Golf and Touran from gearbox manufacture date 01 11 4, Golf Plus, Passat, Passat CC, C