volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Topping up gear oil in bevel box > < Checking or topping up gear oil in bevel box

Golf Mk6

Checking gear oil in bevel box
Checking gear oil in bevel box
Conditions
l  Bevel box must be in installation position.
Perform the following steps:
–  Remove noise insulation → General body repairs, exterior; Rep. gr.50.
   
–  Unbolt heat shield for right drive shaft from bevel box -arrows-.
–  Place drip tray under bevel box.
  Note
Cover area beneath oil filler plug -arrow- with a cloth.
  A34-10415
–  Remove oil filler plug -arrow- from bevel box.
Oil filler plug -arrow- must be renewed.
Oil level is correct when bevel box is filled to lower edge of filler hole.
If oil should get on bevel box, carefully remove it.
–  Top up gear oil if necessary → Chapter.
–  Install new oil filler plug -arrow- and tighten to specified torque → Chapter.
  N34-10725

Topping up gear oil in bevel box > < Checking or topping up gear oil in bevel box