Golf Mk6
| Assembly overview - gearbox housing cover |
| 1 - | Cylindrical roller bearing |
| q | For output shaft |
| q | Do not interchange with cylindrical roller bearing for input shaft |
| q | Pulling out → Fig. |
| q | Larger diameter from gearbox date 21 08 6 → Fig. |
| q | Pressing in through gearbox date 20 08 6: → Fig. |
| q | Pressing in from gearbox date 21 08 6: → Fig. |
| q | Locking → Fig. |
| 2 - | Cylindrical roller bearing |
| q | For input shaft |
| q | Do not interchange with cylindrical roller bearing for output shaft |
| q | Pulling out → Fig. |
| q | Larger diameter from gearbox date 21 08 6 → Fig. |
| q | Pressing in through gearbox date 20 08 6: → Fig. |
| q | Pressing in from gearbox date 21 08 6: → Fig. |
| q | Locking → Fig. |
| 3 - | Gearbox housing cover |
| q | Cylindrical roller bearings modified from gearbox date 21 08 6 → Fig. |
| 4 - | Magnet |
| q | From 11.10 |
| q | Can only be fitted in cover with notch -arrow- |
| 5 - | Clip |
| q | Holds magnet in position. |
