volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing Haldex coupling pumpV181

Golf Mk6

Removing
Removing
Perform the following steps:
–  Switch off ignition.
–  Place drip tray underneath.
   
–  Remove drain plug -A- and drain high-performance oil for Haldex coupling completely.
–  Install drain plug -A- with new seal and tighten to 30 Nm.
  A39-10047
–  Pull connector -arrow- for pump off control unit.
–  Pull wiring harness off housing.
–  Place drip tray under final drive.
  N39-10108
–  Remove securing bolts -1- for pump.
–  Pull pump -arrow- out of Haldex coupling housing.
  A39-10050

Installing > < Removing and installing Haldex coupling pumpV181