Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing ancillary bracket >
< Removing and installing tensioner for poly V-belt
Golf Mk6
Power unit
4-cylinder diesel engine (2.0 l engine, common rail)
Enginecrankshaft group, pistons / Cylinder block (pulley end) / moving_and_installing_tensioner_for_poly_v-belt/">Removing and installing tensioner for poly V-belt
Removing and installing poly V-belt tensioner
Removing and installing poly V-belt tensioner
Removing and installing poly V-belt tensioner
Removing
–
Remove poly V-belt
→ Chapter
.
–
Loosen clamp
-2-
, raise retaining clip
-1-
and remove connecting hose on
»cold side«
.
–
Remove cowling together with radiator fan -V7- and radiator fan on right of radiator -V35-
→ Chapter
.
–
Remove securing bolts
-arrows-
from charge air pipe and separate connector
-1-
from charge air pressure sender -G31-.
–
Open clamp
-2-
, lay coolant hose
-3-
to side and remove charge air pipe.
–
Unscrew securing bolt
-2-
and remove poly V-belt tensioner
-1-
.
Installing
Install in reverse order. In the process, note the following:
t
Renew bolt for tensioning element
t
Specified torques
→ Chapter
.
t
Install poly V-belt
→ Chapter
.
Power unit
4-cylinder diesel engine (2.0 l engine, common rail)
Enginecrankshaft group, pistons / Cylinder block (pulley end) / moving_and_installing_tensioner_for_poly_v-belt/">Removing and installing tensioner for poly V-belt
Removing and installing poly V-belt tensioner
Removing and installing ancillary bracket >
< Removing and installing tensioner for poly V-belt