Golf Mk6
|
| Routing cables/lines to exhaust flap control unit. |
| 1 - | SCR catalytic converter |
| 2 - | NOx storage catalytic converter |
| 3 - | Direction of travel |
| 4 - | Line |
| q | Note installation position. |
| q | Check for secure seating. |
| 5 - | Cable retainer |
| 6 - | Heat shield |
| q | Note installation position. |
| q | Renew if damaged. |
| 7 - | Connector for exhaust flap control unit -J883- |
| 8 - | Exhaust flap control unit -J883- |
| Routing lines from Lambda probe after catalytic converter -G130- and exhaust temperature sender 4 -G648- |
| 1 - | Lambda probe after catalytic converter -G130- |
| 2 - | Cable retainer |
| 3 - | Exhaust gas temperature sender 4 -G648- |
| 4 - | Distance apart: 100 mm |
| 5 - | Line |
| q | Note installation position. |
| q | Check for secure seating. |
