volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - charge-air hose connections with corrugated pipe connection > < Assembly overview - charge-air hose connections

Golf Mk6

Assembly overview - charge-air hose connections with connector couplings
Assembly overview - charge-air hose connections with connector couplings
  Caution
The seal in the connector coupling can be damaged if the securing clip is in the locked position when fitting the connector. This can cause leakage. Observe installation instructions.
Removing
   
–  Release connector coupling by pulling securing clip -1-. Pull hose/pipe-2- off without the use of tools.
Installing
–  If renewed, place oil seal in groove of charge air hose. Ensure the seal is correctly seated in the groove.
–  Lubricate sealing surface and seal with oil.
–  Bring retaining clip to release position -1-.
–  Push charge air hose into coupling to stop.
  N50-10000
–  Bring securing clip to locking position -2- and then push charge air hose again.
–  Check if connector coupling seats correctly and is properly engaged by pulling hose.
  N21-10133

Assembly overview - charge-air hose connections with corrugated pipe connection > < Assembly overview - charge-air hose connections