Golf Mk6
| Assembly overview - fuel rail with injectors |
| 1 - | O-ring |
| q | Renew. |
| q | Before installing, moisten lightly with clean engine oil. |
| 2 - | Spring element |
| q | Renew each time after removing lower part of intake manifold. |
| q | Ensure proper seating on injector. |
| 3 - | Injector, cylinder 4 -N33- |
| q | Injector, cylinder 1 -N30- |
| q | Injector, cylinder 2 -N31- |
| q | Injector, cylinder 3 -N32- |
| q | With Teflon seal and support washer. |
| q | After removing injector, Teflon seal and support washer must be renewed → Chapter. |
| q | Removing and installing injectors → Chapter. |
| 4 - | Intake manifold lower part |
| q | To remove, remove and install throttle valve module -J338- and intake manifold → Chapter. |
