Golf Mk6
| Assembly overview - part I, intake manifold |
| 1 - | Connecting hose |
| 2 - | Fuel pipe |
| q | High-pressure. |
| Specified torques for union nuts. |
| To high-pressure pump: 18 Nm. |
| To lower part of intake manifold: 20 Nm |
| 3 - | 8 Nm |
| 4 - | Retaining clamp |
| 5 - | Fuel hose |
| q | Low-pressure. |
| q | To high-pressure pump. |
| 6 - | Spring-type clip |
| q | Removing and installing with hose clip pliers -VAS 6340-. |
| 7 - | Connection |
| q | For fuel supply. |
| 8 - | Non-return valve |
| q | For crankcase ventilation. |
| 9 - | 8 Nm |
| 10 - | O-ring |
| q | Renew. |
| 11 - | Connection |
| q | On valve timing housing. |
| 12 - | Pressure pipe |
| q | From turbocharger |
| 13 - | Connecting hose |
| q | On camshaft housing. |
| 14 - | Non-return valve |
| 15 - | Connecting hose |
| q | On air filter housing. |
| 16 - | Connecting hose |
| q | On activated charcoal filter. |
| 17 - | Activated charcoal filter solenoid valve 1 -N80- |
| 18 - | Connecting hose |
| 19 - | Retaining clamp |
| 20 - | Connecting hose |
| 21 - | Connecting hose |
| q | On turbocharger. |
