volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - turbocharger > < Removing and installing radiator (Golf Plus, Eos, Scirocco, Golf, Touran, Golf Cabriolet)

Golf Mk6

Turbocharger
Turbocharger
  Note
t  Secure all hose connections with hose clips which conform to production standard.
t  Hose connections and hoses for charge air system must be free of oil and grease before assembly. The oil seal and sealing surface must only be oiled lightly for connector couplings → Chapter.
t  Charge air system must be free of leaks.
t  Renew self-locking nuts.
   
t  Spring-type clip pliers -VAS 5024A- or hose clip pliers -VAS 6340- are recommended for installation of spring-type clips.
t  Fill turbocharger with engine oil at oil supply line connection.
t  After installing turbocharger, run engine for about 1 minute at idle and do not rev up immediately. This ensures that the turbocharger is fully primed with oil.
→ Chapter „Assembly overview - turbocharger“
→ Chapter „Removing and installing turbocharger“
→ Chapter „Checking vacuum unit for turbocharger“
→ Chapter „Removing and installing vacuum unit for turbocharger“
→ Chapter „Adjusting vacuum unit for turbocharger“
  W00-10380

Assembly overview - turbocharger > < Removing and installing radiator (Golf Plus, Eos, Scirocco, Golf, Touran, Golf Cabriolet)