volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking oil pressure and oil pressure switch > < Removing and installing sump

Golf Mk6

Removing and installing oil pump
Removing and installing oil pump
Removing
–  Remove sump and baffle plate → Chapter.
   
–  Remove bolts -2-.
–  Pull sprocket off oil pump shaft.
–  Remove bolts -1- and -3- and remove oil pump.
Installing:
Installation is carried out in the reverse order. When installing, note the following:
–  Insert dowel sleeves → Item on top of oil pump.
The sprocket can be fitted in only one position on oil pump shaft.
–  Install sump → Chapter.
Torque settings
  A17-0209
ComponentNm
Sprocket to oil pump shaft20 Nm + 90° → Note
Oil pump to cylinder block15

1)  Renew bolts.
   

Checking oil pressure and oil pressure switch > < Removing and installing sump