Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Camshaft timing chain - exploded view >
< Removing and installing lower timing chain cover (Golf, Eos, Scirocco)
Golf Mk6
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Engine cylinder head, valve gear / Chain drive
Renewing oil seal for vibration damper
Renewing oil seal for vibration damper
Renewing oil seal for vibration damper
Special tools and workshop equipment required
t
Thrust piece -T10354-
t
Puller hooks -T20143/2-
Removing
Proceed as follows:
–
Remove vibration damper
→ Chapter
.
–
Remove vibration damper and screw sleeve -T10368- on again instead.
–
Pull out oil seal using puller hooks -T20143/2-.
Installing
l
Specified torques
→ Chapter
.
–
Clean contact surface and sealing surface.
–
Unscrew sleeve -T10368-.
–
Use thrust piece -T10354- and bolt for vibration damper to pull in oil seal
-arrow-
onto stop.
Note
t
Renew bolt for vibration damper.
t
Renew O-ring.
Further assembly is basically the reverse of the dismantling sequence.
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Engine cylinder head, valve gear / Chain drive
Renewing oil seal for vibration damper
Camshaft timing chain - exploded view >
< Removing and installing lower timing chain cover (Golf, Eos, Scirocco)