volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing valve stem seals > < Removing and installing camshafts

Golf Mk6

Checking axial clearance of camshafts
Checking axial clearance of camshafts
Special tools and workshop equipment required
   
t  Universal dial gauge bracket -VW 387-
  W00-0037
t  Dial gauge -VAS 6079-
  W00-1261
Test procedure
–  Perform measurement with retaining frame removed.
–  Fit camshaft to be tested in retaining frame.
–  Attach dial gauge -VAS 6079- with universal dial gauge holder -VW 387- to cylinder head.
–  Press camshaft against dial gauge by hand.
–  Set dial gauge to „0“.
–  Press camshaft away from dial gauge and read off value:
l  Axial clearance: 0.05 … 0.17 mm.
  A15-10180

Renewing valve stem seals > < Removing and installing camshafts